Valueerror Continuous is Not Supported Site stackoverflow com

article header image

Introduction

In many practical Data Science activities, the data set will contain categorical variables. These variables are typically stored as text values which represent various traits. Some examples include color ("Red", "Yellow", "Blue"), size ("Small", "Medium", "Large") or geographic designations (State or Country). Regardless of what the value is used for, the challenge is determining how to use this data in the analysis. Many machine learning algorithms can support categorical values without further manipulation but there are many more algorithms that do not. Therefore, the analyst is faced with the challenge of figuring out how to turn these text attributes into numerical values for further processing.

As with many other aspects of the Data Science world, there is no single answer on how to approach this problem. Each approach has trade-offs and has potential impact on the outcome of the analysis. Fortunately, the python tools of pandas and scikit-learn provide several approaches that can be applied to transform the categorical data into suitable numeric values. This article will be a survey of some of the various common (and a few more complex) approaches in the hope that it will help others apply these techniques to their real world problems.

The Data Set

For this article, I was able to find a good dataset at the UCI Machine Learning Repository. This particular Automobile Data Set includes a good mix of categorical values as well as continuous values and serves as a useful example that is relatively easy to understand. Since domain understanding is an important aspect when deciding how to encode various categorical values - this data set makes a good case study.

Before we get started encoding the various values, we need to important the data and do some minor cleanups. Fortunately, pandas makes this straightforward:

                            import              pandas              as              pd              import              numpy              as              np              # Define the headers since the data does not have any              headers              =              [              "symboling"              ,              "normalized_losses"              ,              "make"              ,              "fuel_type"              ,              "aspiration"              ,              "num_doors"              ,              "body_style"              ,              "drive_wheels"              ,              "engine_location"              ,              "wheel_base"              ,              "length"              ,              "width"              ,              "height"              ,              "curb_weight"              ,              "engine_type"              ,              "num_cylinders"              ,              "engine_size"              ,              "fuel_system"              ,              "bore"              ,              "stroke"              ,              "compression_ratio"              ,              "horsepower"              ,              "peak_rpm"              ,              "city_mpg"              ,              "highway_mpg"              ,              "price"              ]              # Read in the CSV file and convert "?" to NaN              df              =              pd              .              read_csv              (              "https://archive.ics.uci.edu/ml/machine-learning-databases/autos/imports-85.data"              ,              header              =              None              ,              names              =              headers              ,              na_values              =              "?"              )              df              .              head              ()            
symboling normalized_losses make fuel_type aspiration num_doors body_style drive_wheels engine_location wheel_base engine_size fuel_system bore stroke compression_ratio horsepower peak_rpm city_mpg highway_mpg price
0 3 NaN alfa-romero gas std two convertible rwd front 88.6 130 mpfi 3.47 2.68 9.0 111.0 5000.0 21 27 13495.0
1 3 NaN alfa-romero gas std two convertible rwd front 88.6 130 mpfi 3.47 2.68 9.0 111.0 5000.0 21 27 16500.0
2 1 NaN alfa-romero gas std two hatchback rwd front 94.5 152 mpfi 2.68 3.47 9.0 154.0 5000.0 19 26 16500.0
3 2 164.0 audi gas std four sedan fwd front 99.8 109 mpfi 3.19 3.40 10.0 102.0 5500.0 24 30 13950.0
4 2 164.0 audi gas std four sedan 4wd front 99.4 136 mpfi 3.19 3.40 8.0 115.0 5500.0 18 22 17450.0

The final check we want to do is see what data types we have:

symboling              int64 normalized_losses    float64 make                  object fuel_type             object aspiration            object num_doors             object body_style            object drive_wheels          object engine_location       object wheel_base           float64 length               float64 width                float64 height               float64 curb_weight            int64 engine_type           object num_cylinders         object engine_size            int64 fuel_system           object bore                 float64 stroke               float64 compression_ratio    float64 horsepower           float64 peak_rpm             float64 city_mpg               int64 highway_mpg            int64 price                float64 dtype: object          

Since this article will only focus on encoding the categorical variables, we are going to include only the object columns in our dataframe. Pandas has a helpful select_dtypes function which we can use to build a new dataframe containing only the object columns.

                            obj_df              =              df              .              select_dtypes              (              include              =              [              'object'              ])              .              copy              ()              obj_df              .              head              ()            
make fuel_type aspiration num_doors body_style drive_wheels engine_location engine_type num_cylinders fuel_system
0 alfa-romero gas std two convertible rwd front dohc four mpfi
1 alfa-romero gas std two convertible rwd front dohc four mpfi
2 alfa-romero gas std two hatchback rwd front ohcv six mpfi
3 audi gas std four sedan fwd front ohc four mpfi
4 audi gas std four sedan 4wd front ohc five mpfi

Before going any further, there are a couple of null values in the data that we need to clean up.

                            obj_df              [              obj_df              .              isnull              ()              .              any              (              axis              =              1              )]            
make fuel_type aspiration num_doors body_style drive_wheels engine_location engine_type num_cylinders fuel_system
27 dodge gas turbo NaN sedan fwd front ohc four mpfi
63 mazda diesel std NaN sedan fwd front ohc four idi

For the sake of simplicity, just fill in the value with the number 4 (since that is the most common value):

                            obj_df              [              "num_doors"              ]              .              value_counts              ()            
four    114 two      89 Name: num_doors, dtype: int64          
                            obj_df              =              obj_df              .              fillna              ({              "num_doors"              :              "four"              })            

Now that the data does not have any null values, we can look at options for encoding the categorical values.

Approach #1 - Find and Replace

Before we go into some of the more "standard" approaches for encoding categorical data, this data set highlights one potential approach I'm calling "find and replace."

There are two columns of data where the values are words used to represent numbers. Specifically the number of cylinders in the engine and number of doors on the car. Pandas makes it easy for us to directly replace the text values with their numeric equivalent by using replace .

We have already seen that the num_doors data only includes 2 or 4 doors. The number of cylinders only includes 7 values and they are easily translated to valid numbers:

                            obj_df              [              "num_cylinders"              ]              .              value_counts              ()            
four      159 six        24 five       11 eight       5 two         4 twelve      1 three       1 Name: num_cylinders, dtype: int64          

If you review the replace documentation, you can see that it is a powerful command that has many options. For our uses, we are going to create a mapping dictionary that contains each column to process as well as a dictionary of the values to translate.

Here is the complete dictionary for cleaning up the num_doors and num_cylinders columns:

                            cleanup_nums              =              {              "num_doors"              :              {              "four"              :              4              ,              "two"              :              2              },              "num_cylinders"              :              {              "four"              :              4              ,              "six"              :              6              ,              "five"              :              5              ,              "eight"              :              8              ,              "two"              :              2              ,              "twelve"              :              12              ,              "three"              :              3              }}            

To convert the columns to numbers using replace :

                            obj_df              =              obj_df              .              replace              (              cleanup_nums              )              obj_df              .              head              ()            
make fuel_type aspiration num_doors body_style drive_wheels engine_location engine_type num_cylinders fuel_system
0 alfa-romero gas std 2 convertible rwd front dohc 4 mpfi
1 alfa-romero gas std 2 convertible rwd front dohc 4 mpfi
2 alfa-romero gas std 2 hatchback rwd front ohcv 6 mpfi
3 audi gas std 4 sedan fwd front ohc 4 mpfi
4 audi gas std 4 sedan 4wd front ohc 5 mpfi

The nice benefit to this approach is that pandas "knows" the types of values in the columns so the object is now a int64

make               object fuel_type          object aspiration         object num_doors           int64 body_style         object drive_wheels       object engine_location    object engine_type        object num_cylinders       int64 fuel_system        object dtype: object          

While this approach may only work in certain scenarios it is a very useful demonstration of how to convert text values to numeric when there is an "easy" human interpretation of the data. This concept is also useful for more general data cleanup.

Approach #2 - Label Encoding

Another approach to encoding categorical values is to use a technique called label encoding. Label encoding is simply converting each value in a column to a number. For example, the body_style column contains 5 different values. We could choose to encode it like this:

  • convertible -> 0
  • hardtop -> 1
  • hatchback -> 2
  • sedan -> 3
  • wagon -> 4

This process reminds me of Ralphie using his secret decoder ring in "A Christmas Story"

Ralphie as a young data scientist

One trick you can use in pandas is to convert a column to a category, then use those category values for your label encoding:

                            obj_df              [              "body_style"              ]              =              obj_df              [              "body_style"              ]              .              astype              (              'category'              )              obj_df              .              dtypes            
make                 object fuel_type            object aspiration           object num_doors             int64 body_style         category drive_wheels         object engine_location      object engine_type          object num_cylinders         int64 fuel_system          object dtype: object          

Then you can assign the encoded variable to a new column using the cat.codes accessor:

                            obj_df              [              "body_style_cat"              ]              =              obj_df              [              "body_style"              ]              .              cat              .              codes              obj_df              .              head              ()            
make fuel_type aspiration num_doors body_style drive_wheels engine_location engine_type num_cylinders fuel_system body_style_cat
0 alfa-romero gas std 2 convertible rwd front dohc 4 mpfi 0
1 alfa-romero gas std 2 convertible rwd front dohc 4 mpfi 0
2 alfa-romero gas std 2 hatchback rwd front ohcv 6 mpfi 2
3 audi gas std 4 sedan fwd front ohc 4 mpfi 3
4 audi gas std 4 sedan 4wd front ohc 5 mpfi 3

The nice aspect of this approach is that you get the benefits of pandas categories (compact data size, ability to order, plotting support) but can easily be converted to numeric values for further analysis.

Approach #3 - One Hot Encoding

Label encoding has the advantage that it is straightforward but it has the disadvantage that the numeric values can be "misinterpreted" by the algorithms. For example, the value of 0 is obviously less than the value of 4 but does that really correspond to the data set in real life? Does a wagon have "4X" more weight in our calculation than the convertible? In this example, I don't think so.

A common alternative approach is called one hot encoding (but also goes by several different names shown below). Despite the different names, the basic strategy is to convert each category value into a new column and assigns a 1 or 0 (True/False) value to the column. This has the benefit of not weighting a value improperly but does have the downside of adding more columns to the data set.

Pandas supports this feature using get_dummies. This function is named this way because it creates dummy/indicator variables (aka 1 or 0).

Hopefully a simple example will make this more clear. We can look at the column drive_wheels where we have values of 4wd , fwd or rwd . By using get_dummies we can convert this to three columns with a 1 or 0 corresponding to the correct value:

                            pd              .              get_dummies              (              obj_df              ,              columns              =              [              "drive_wheels"              ])              .              head              ()            
make fuel_type aspiration num_doors body_style engine_location engine_type num_cylinders fuel_system body_style_cat drive_wheels_4wd drive_wheels_fwd drive_wheels_rwd
0 alfa-romero gas std 2 convertible front dohc 4 mpfi 0 0.0 0.0 1.0
1 alfa-romero gas std 2 convertible front dohc 4 mpfi 0 0.0 0.0 1.0
2 alfa-romero gas std 2 hatchback front ohcv 6 mpfi 2 0.0 0.0 1.0
3 audi gas std 4 sedan front ohc 4 mpfi 3 0.0 1.0 0.0
4 audi gas std 4 sedan front ohc 5 mpfi 3 1.0 0.0 0.0

The new data set contains three new columns:

  • drive_wheels_4wd
  • drive_wheels_rwd
  • drive_wheels_fwd

This function is powerful because you can pass as many category columns as you would like and choose how to label the columns using prefix . Proper naming will make the rest of the analysis just a little bit easier.

                            pd              .              get_dummies              (              obj_df              ,              columns              =              [              "body_style"              ,              "drive_wheels"              ],              prefix              =              [              "body"              ,              "drive"              ])              .              head              ()            
make fuel_type aspiration num_doors engine_location engine_type num_cylinders fuel_system body_style_cat body_convertible body_hardtop body_hatchback body_sedan body_wagon drive_4wd drive_fwd drive_rwd
0 alfa-romero gas std 2 front dohc 4 mpfi 0 1.0 0.0 0.0 0.0 0.0 0.0 0.0 1.0
1 alfa-romero gas std 2 front dohc 4 mpfi 0 1.0 0.0 0.0 0.0 0.0 0.0 0.0 1.0
2 alfa-romero gas std 2 front ohcv 6 mpfi 2 0.0 0.0 1.0 0.0 0.0 0.0 0.0 1.0
3 audi gas std 4 front ohc 4 mpfi 3 0.0 0.0 0.0 1.0 0.0 0.0 1.0 0.0
4 audi gas std 4 front ohc 5 mpfi 3 0.0 0.0 0.0 1.0 0.0 1.0 0.0 0.0

The other concept to keep in mind is that get_dummies returns the full dataframe so you will need to filter out the objects using select_dtypes when you are ready to do the final analysis.

One hot encoding, is very useful but it can cause the number of columns to expand greatly if you have very many unique values in a column. For the number of values in this example, it is not a problem. However you can see how this gets really challenging to manage when you have many more options.

Approach #4 - Custom Binary Encoding

Depending on the data set, you may be able to use some combination of label encoding and one hot encoding to create a binary column that meets your needs for further analysis.

In this particular data set, there is a column called engine_type that contains several different values:

                            obj_df              [              "engine_type"              ]              .              value_counts              ()            
ohc      148 ohcf      15 ohcv      13 l         12 dohc      12 rotor      4 dohcv      1 Name: engine_type, dtype: int64          

For the sake of discussion, maybe all we care about is whether or not the engine is an Overhead Cam (OHC) or not. In other words, the various versions of OHC are all the same for this analysis. If this is the case, then we could use the str accessor plus np.where to create a new column the indicates whether or not the car has an OHC engine.

                            obj_df              [              "OHC_Code"              ]              =              np              .              where              (              obj_df              [              "engine_type"              ]              .              str              .              contains              (              "ohc"              ),              1              ,              0              )            

I find that this is a handy function I use quite a bit but sometimes forget the syntax so here is a graphic showing what we are doing:

example of np.where

The resulting dataframe looks like this (only showing a subset of columns):

                            obj_df              [[              "make"              ,              "engine_type"              ,              "OHC_Code"              ]]              .              head              ()            
make engine_type OHC_Code
0 alfa-romero dohc 1
1 alfa-romero dohc 1
2 alfa-romero ohcv 1
3 audi ohc 1
4 audi ohc 1

This approach can be really useful if there is an option to consolidate to a simple Y/N value in a column. This also highlights how important domain knowledge is to solving the problem in the most efficient manner possible.

Scikit-Learn

scikit-learn updates

The previous version of this article used LabelEncoder and LabelBinarizer which are not the recommended approach for encoding categorical values. These encoders should only be used to encode the target values not the feature values.

The examples below use OrdinalEncoder and OneHotEncoder which is the correct approach to use for encoding target values.

In addition to the pandas approach, scikit-learn provides similar functionality. Personally, I find using pandas a little simpler to understand but the scikit approach is optimal when you are trying to build a predictive model.

For instance, if we want to do the equivalent to label encoding on the make of the car, we need to instantiate a OrdinalEncoder object and fit_transform the data:

                            from              sklearn.preprocessing              import              OrdinalEncoder              ord_enc              =              OrdinalEncoder              ()              obj_df              [              "make_code"              ]              =              ord_enc              .              fit_transform              (              obj_df              [[              "make"              ]])              obj_df              [[              "make"              ,              "make_code"              ]]              .              head              (              11              )            
make make_code
0 alfa-romero 0
1 alfa-romero 0
2 alfa-romero 0
3 audi 1
4 audi 1
5 audi 1
6 audi 1
7 audi 1
8 audi 1
9 audi 1
10 bmw 2

Scikit-learn also supports binary encoding by using the OneHotEncoder. We use a similar process as above to transform the data but the process of creating a pandas DataFrame adds a couple of extra steps.

                            from              sklearn.preprocessing              import              OneHotEncoder              oe_style              =              OneHotEncoder              ()              oe_results              =              oe_style              .              fit_transform              (              obj_df              [[              "body_style"              ]])              pd              .              DataFrame              (              oe_results              .              toarray              (),              columns              =              oe_style              .              categories_              )              .              head              ()            
convertible hardtop hatchback sedan wagon
0 1 0 0 0 0
1 1 0 0 0 0
2 0 0 1 0 0
3 0 0 0 1 0
4 0 0 0 1 0

The next step would be to join this data back to the original dataframe. Here is an example:

                            obj_df              =              obj_df              .              join              (              pd              .              DataFrame              (              oe_results              .              toarray              (),              columns              =              oe_style              .              categories_              ))            

The key point is that you need to use toarray() to convert the results to a format that can be converted into a DataFrame.

Advanced Approaches

There are even more advanced algorithms for categorical encoding. I do not have a lot of personal experience with them but for the sake of rounding out this guide, I wanted to included them. This article provides some additional technical background. The other nice aspect is that the author of the article has created a scikit-learn contrib package called category_encoders which implements many of these approaches. It is a very nice tool for approaching this problem from a different perspective.

Here is a brief introduction to using the library for some other types of encoding. For the first example, we will try doing a Backward Difference encoding.

First we get a clean dataframe and setup the BackwardDifferenceEncoder :

                            import              category_encoders              as              ce              # Get a new clean dataframe              obj_df              =              df              .              select_dtypes              (              include              =              [              'object'              ])              .              copy              ()              # Specify the columns to encode then fit and transform              encoder              =              ce              .              BackwardDifferenceEncoder              (              cols              =              [              "engine_type"              ])              encoder              .              fit_transform              (              obj_df              ,              verbose              =              1              )              .              iloc              [:,              8              :              14              ]              .              head              ()            
engine_type_0 engine_type_1 engine_type_2 engine_type_3 engine_type_4 engine_type_5
0 -0.857143 -0.714286 -0.571429 -0.428571 -0.285714 -0.142857
1 -0.857143 -0.714286 -0.571429 -0.428571 -0.285714 -0.142857
2 0.142857 -0.714286 -0.571429 -0.428571 -0.285714 -0.142857
3 0.142857 0.285714 -0.571429 -0.428571 -0.285714 -0.142857
4 0.142857 0.285714 -0.571429 -0.428571 -0.285714 -0.142857

The interesting thing is that you can see that the result are not the standard 1's and 0's we saw in the earlier encoding examples.

If we try a polynomial encoding, we get a different distribution of values used to encode the columns:

                            encoder              =              ce              .              PolynomialEncoder              (              cols              =              [              "engine_type"              ])              encoder              .              fit_transform              (              obj_df              ,              verbose              =              1              )              .              iloc              [:,              8              :              14              ]              .              head              ()            
engine_type_0 engine_type_1 engine_type_2 engine_type_3 engine_type_4 engine_type_5
0 -0.566947 0.545545 -0.408248 0.241747 -0.109109 0.032898
1 -0.566947 0.545545 -0.408248 0.241747 -0.109109 0.032898
2 -0.377964 0.000000 0.408248 -0.564076 0.436436 -0.197386
3 -0.188982 -0.327327 0.408248 0.080582 -0.545545 0.493464
4 -0.188982 -0.327327 0.408248 0.080582 -0.545545 0.493464

There are several different algorithms included in this package and the best way to learn is to try them out and see if it helps you with the accuracy of your analysis. The code shown above should give you guidance on how to plug in the other approaches and see what kind of results you get.

scikit-learn pipelines

Using pipelines

This section was added in November 2020. The goal is to show how to integrate the scikit-learn feature encoding functions into a simple model building pipeline.

As mentioned above, scikit-learn's categorical encoders allow you to incorporate the transformation into your pipelines which can simplify the model building process and avoid some pitfalls. I recommend this Data School video as a good intro. It also serves as the basis for the approach outlined below.

Here is a very quick example of how to incorporate the OneHotEncoder and OrdinalEncoder into a pipeline and use cross_val_score to analyze the results:

                            from              sklearn.compose              import              make_column_transformer              from              sklearn.linear_model              import              LinearRegression              from              sklearn.pipeline              import              make_pipeline              from              sklearn.model_selection              import              cross_val_score              # for the purposes of this analysis, only use a small subset of features              feature_cols              =              [              'fuel_type'              ,              'make'              ,              'aspiration'              ,              'highway_mpg'              ,              'city_mpg'              ,              'curb_weight'              ,              'drive_wheels'              ]              # Remove the empty price rows              df_ml              =              df              .              dropna              (              subset              =              [              'price'              ])              X              =              df_ml              [              feature_cols              ]              y              =              df_ml              [              'price'              ]            

Now that we have our data, let's build the column transformer:

                            column_trans              =              make_column_transformer              ((              OneHotEncoder              (              handle_unknown              =              'ignore'              ),              [              'fuel_type'              ,              'make'              ,              'drive_wheels'              ]),              (              OrdinalEncoder              (),              [              'aspiration'              ]),              remainder              =              'passthrough'              )            

This example shows how to apply different encoder types for certain columns. Using the remainder='passthrough' argument to pass all the numeric values through the pipeline without any changes.

For the model, we use a simple linear regression and then make the pipeline:

                            linreg              =              LinearRegression              ()              pipe              =              make_pipeline              (              column_trans              ,              linreg              )            

Run the cross validation 10 times using the negative mean absolute error as our scoring function. Finally, take the average of the 10 values to see the magnitude of the error:

                            cross_val_score              (              pipe              ,              X              ,              y              ,              cv              =              10              ,              scoring              =              'neg_mean_absolute_error'              )              .              mean              ()              .              round              (              2              )            

Which yields a value of -2937.17.

There is obviously much more analysis that can be done here but this is meant to illustrate how to use the scikit-learn functions in a more realistic analysis pipeline.

Conclusion

Encoding categorical variables is an important step in the data science process. Because there are multiple approaches to encoding variables, it is important to understand the various options and how to implement them on your own data sets. The python data science ecosystem has many helpful approaches to handling these problems. I encourage you to keep these ideas in mind the next time you find yourself analyzing categorical variables. For more details on the code in this article, feel free to review the notebook.

Changes

  • 28-Nov-2020: Fixed broken links and updated scikit-learn section. Included pipeline example. Minor code tweaks for consistency.
  • 9-Jan-2021: Fixed typo in OneHotEncoder example.

karcherwuzze1991.blogspot.com

Source: https://pbpython.com/categorical-encoding.html

Belum ada Komentar untuk "Valueerror Continuous is Not Supported Site stackoverflow com"

Posting Komentar

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel